Комплект интеркулера APR для VW MKV 1.8T
APR is pleased to present our front mounted intercooler for the A4, TT, Passat, Golf, GTI and Jetta 1.8T. The construction and advanced design techniques used in the APR intercooler sets ours apart from all the others on the market. Utilizing such technologies as a top-bottom feed core, custom mandrel bent plumbing, and innovative cast endtanks with internal vaning, our intercooler has produced excellent results in testing. The 180TT features a "C"-style intercooler, and the 225TT has a "Z"-style intercooler.
The conditions of one test that was performed is as follows: at 20 psi of pressure with a vehicle speed of 70 mph, and an elevation of approximately 500 feet above sea level. Under these conditions the internal flow was measured at 720cfm. Also at those conditions, with an input temp of 240º F, the intercooler was quite effective; cooling the output air to 126º F. While doing this, the intercooler measured a pressure drop of only .58 psi.
Equally as impressive with the APR intercooler was the external pressure drop (the amount of air pressure behind the intercooler) of only 1.01 psi. This helps to allow airflow to other critical parts of the car such as the radiator and A/C condenser. While the internal pressure drop is important, the external pressure drop is often overlooked. Most other intercoolers commonly cause 1.5 to 2.0 pounds of pressure drop, hindering the radiator from effectively doing its job of cooling the engine.
The highlights of the APR Intercooler kits include the following:
APR Cast End Tanks with Internal Vaning
Top-Bottom Feed Bar and Plate Aluminum Core
Mandrel-Bent, Powdercoated Stainless Steel Plumbing
APR Custom Silicone Intake Hoses
All Associated Bracketry and Hardware
2000-2005 VW Golf 1.8T & TDI
2000-2005 VW GTI 1.8T